线型和非线型分子转动光谱强度的统计模型

In this study, we found regular behavior, from a statistical point of view, in the intensities of rotational spectra for several organic and inorganic molecules at room temperature. Non-linear molecules, for which a common intensity behavior was derived, were especially interesting. We provided theoretical support for the obtained results based on the Boltzmann distribution. Boltzmann power laws were used to reproduce the statistical behavior of the intensities from the spectra of linear and non-linear molecules. We only used statistical arguments and no specific details of any molecule were used. Therefore, these results are applicable to a large class of atoms and molecules and the model is valid when considering similar conditions to those used in this study.     

选择性合成不同形貌的Sb2S3纳米结构应用于高性能的染料敏化太阳能电池（英文）

近几十年来,随着全球变暖和能源危机的日益严重,对取之不尽、用之不竭的清洁能源技术的需求越来越迫切.1991年Gratzel首次报道了染料敏化太阳能电池(DSSCs),它以低廉的价格、优异的理论功率转换效率(PCE)、环保、多色透明等优点而引起了研究者的关注.Sb2S3因其1.5-2.2 eV的间隙宽度被认为是最有前途的对电极材料之一.此外,Sb2S3是地球中含量丰富的无毒锑矿物的主要成分,还被广泛应用于太阳能转换材料、催化剂、光导探测器等领域.众所周知,石墨烯具有巨大的比表面积、显著的载流子迁移率和优异的热/化学稳定性,这使得提高电子转移效率和电催化活性成为可能.首先,采用改进的Hummers方法制备了氧化石墨烯纳米片;然后采用水热法通过改变Sb源以及实验pH值,合成了Sb2S3和Sb2S3@RGO样品.对样品进行X射线粉末衍射(XRD)、扫描电子显微镜镜(SEM)、投射电子显微镜(TEM)以及比表面积表征.结果表明,在Sb源不变的情况下,Sb2S3样品的形貌随pH值的变化而变化.以三乙酸锑为Sb源,在pH=3时,Sb2S3的形貌类似于一个完整的纳米棒结构;在pH值为6时,样品为不规则球体;当pH值为8时,纳米片结构开始出现;但当p H=10时,纳米片结构并不均匀.根据XRD分析,只有当pH值为3时,样品的衍射峰才与标准卡(JCPDS42-1393)的衍射峰一致.当以氯化锑作为锑源,样品的形貌由不规则的杆状(pH=3)转变为纳米球(pH=6),然后出现纳米片结构(pH=8).不同的是,当p H值为10时,纳米薄片形成均一的花状结构.XRD结果表明,除pH值为3外,样品的衍射峰与标准卡(JCPDS42-1393)的值吻合较好.结果表明,合成条件所需的Sb源和碱性环境是合成具有均匀花状结构的纳米片状Sb2S3所必不可少的.测得Sb2S3的比表面积约为41.72 m^2g^-1,平均孔径为31.08nm,Sb2S3@RGO的分别为44.53 m^2g^-1和22.65 nm.Sb2S3和Sb2S3@RGO复合材料均具有介孔结构,为内部电催化剂提供了广阔的通道,从而提高了对电极的催化能力,促进了电化学反应.将Sb2S3纳米花球和Sb2S3@RGO纳米薄片作为染料敏化太阳能电池的对电极进行了测试,由于石墨烯的引入,后者比前者具有更好的电催化性能.电化学实验结果表明,与Sb2S3,RGO,Pt作为对电极相比,制备的Sb2S3@RGO纳米薄片具有更好的催化活性、电荷转移能力和电化学稳定性,Sb2S3@RGO的功率转换效率达到8.17%,优于标准Pt对电极(7.75%).     

高功率准分子激光主振荡功率放大系统光学元件的稳定性

为了分析高功率准分子激光主振荡功率放大(MOPA)系统中各光学元件稳定性对靶面光斑定位精度的影响,建立了分析模型,利用分析结果指导高稳定性镜架设计以满足系统实验需求。根据高功率准分子激光MOPA系统特点,有效地简化了系统光路,建立了系统光路模型;按照系统打靶精度要求,利用三维坐标变换和光线追迹法,计算得到了系统单个光学元件稳定性对靶面光斑定位精度的影响规律;最后,对自行设计的镜架进行了稳定性测量。计算结果表明,反射镜的旋转变化和透镜垂直光轴的平移变化是影响靶面光斑定位精度的主要因素,且主放大光路中反射镜在X方向和Y方向上最大的变化范围分别不能超过0.8和1.6μrad。实际测量结果表明,设计的镜架在X方向和Y方向最大的变化范围分别为0.6和0.81μrad,满足系统实验要求。     

长周期光纤光栅的功率特性

用Matlab编程的方法对长周期光栅功率特性进行了研究,数值模拟了长周期光栅入射角度、光栅长度与功率分布的图像关系.研究结论为长周期光纤光栅的设计提供理论依据.     

输油管道的布置

本文建立了非线性规划模型,解决了输油管线布置问题,并给出了输油管线铺设的最佳方案.     

幂格的同余关系

研究分配格的幂格的同余关系,给出幂格的同余关系格的一些重要性质,并得到幂格的一个同余类和同余关系格的两个交半格。     

Experimental investigation of the performance of a thermoelectric generator based on Peltier cells

An experimental investigation is carried out to characterize the performance of thermoelectric modules used for electric power generation over a range of different resistance loads. The performance of a Peltier cell used as a thermoelectric generator is evaluated in terms of power output and conversion efficiency. The results show that a thermoelectric module is a promising device for waste heat recovery.     

Power law fluid model for blood flow through a tapered artery with a stenosis

In the present paper, blood flow through a tapered artery with a stenosis is analyzed, assuming the flow is steady and blood is treated as non-Newtonian power law fluid model. Exact solution has been evaluated for velocity, resistance impedance, wall shear stress and shearing stress at the stenosis throat. The graphical results of different types of tapered arteries (i.e. converging tapering, diverging tapering, non-tapered artery) have been examined for different parameters of interest. Some special cases of the problem are also presented.     

Research progress on transition metal oxide based electrode materials for asymmetric hybrid capacitors

In the past few years, the increasing energy consumption of traditional fossil fuels has posed a huge threat to human health. It is very imperious to develop the sustainable and renewable energy storage and conversion devices with low cost and environment friendly features. Hybrid supercapacitors are emerging as one of the promising energy devices with high power density, fast charge-discharge process and excellent cycle stability. However, morphology and structure of the electrode materials exert serious effect on their electrochemical performances. In this review, we summarized recent progresses in transition metal oxide based electrode materials for supercapacitors. Different synthesis routes and electrochemical performances of electrode materials and storage mechanisms of supercapacitor devices have been presented in details. The future developing trends of supercapacitor based on metal oxide electrode materials are also proposed.